[an error occurred while processing this directive] [an error occurred while processing this directive] [an error occurred while processing this directive]
		     Release Note for SAS 5.3.3
		     ==========================

			   Giuseppe Vacanti

$Id: xmmsas_5.3.3.txt,v 1.1 2002/06/07 10:25:47 saslib Exp $

* Contents

  . SAS releases covered by this note
  . URLs
  . Summary of important changes
  . Package manifest for SAS version 5.3.3
  . New and withdrawn packages
  . Detailed list of changes between SAS 5.3.0 and SAS 5.3.3

* SAS releases covered by this note

The version of the SAS installed can be displayed with the command:

			      sasversion

This version (5.3.3): xmmsas_20020605_1701

Last public version (5.3.0): xmmsas_20020413_2031

SAS versions not made public (but used in the pipeline), whose changes
are also described in this release note:

   5.3.2   xmmsas_20020507_1701
   5.3.1   xmmsas_20020419_1701

* URLs

SAS pages at the XMM-Newton SOC:
   http://xmm.vilspa.esa.es/sas/
 
Pipeline configuration at the XMM-Newton Survey Science Centre:
   http://xmmssc-www.star.le.ac.uk/pipeview/prod/

* Summary of important changes

** General

The main objective of this release is to make it possible to analyze
OM fast mode data. Further, in response to input from the community
we're taking this opportunity to rapidly mend a few problems that have
surfaced since the previous public release. Finally, in response to
the comments received during a very successful SAS workshop, we are
able to introduce a new task to extract spectra and generate
responses.

 o OM fast mode is now fully supported

   The tasks omlcbuild and omfchain are now available. With these it
   is possible to analyze OM fast mode data.

 o New task to extract spectra and generate responses

   The task especget is now available. Given two regions for the
   source and the background, and an event list (MOS or PN) this task
   extracts the spectra and calculates the corresponding rmf and
   arf. It can make use of an existing rmf to speed up the
   computation.

 o Calibration Access Layer

   The CAL library has now knowledge of the few CCF constituents that
   cannot be used with the current SAS release. When a task accesses
   one of these invalid CCF constituents a warning is issued. The
   warning's label is 'ExpiredCcfConstituent'.

 o ODF Access Layer

   If a task is run on an ODF witout first running odfingest, the
   error message 'InvalidSummaryFile' is issued instead of a less
   clear message about missing exposures.

   In some circumstances scheduled and unscheduled exposures would not
   be identified correctly. This is no longer the case.

** Problems that have been solved since version 5.3.0

 o emproc (epicproc): it now processes the external chips for
   exposures taken in timing mode.

 o emproc and epproc (epicproc): they now process all imaging and
   timing modes by default. They also run the task hkgtigen correctly.

 o xmmselect: a problem in the error library that would have caused
   unexplained crashes has been solved.

 o cal: fix a problem with atan2(0,0) that would cause a problem on
   Compaq/Tru64.

 o emframes: under some circumstances it could generated negative time
   stamps.

 o rgsspectrum: it no longer writes NaN in the extracted spectrum, as
   this causes a problem on Compaq/Tru64.

 o perl tasks: with some perl installations a number of perl tasks
   would not work properly, complaining that 'symbol main' could not
   be found. This is no longer the case.

 o sashelp: it supports mozilla as well as netscape.

 o atthkgen: it now calculates the median attitude correctly.

* Package manifest for SAS version 5.3.3

addattribute-1.8.tgz
arfgen-1.48.10.tgz
asmooth-2.4.4.tgz
attcalc-4.27.1.tgz
atthkgen-1.17.3.tgz
backcorr-2.2.4.tgz
backscale-1.0.1.tgz
badpix-2.26.2.tgz
badpixfind-1.28.tgz
barycen-1.13.2.tgz
cal-3.138.4.tgz
calmosalgo-2.7.1.tgz
caloalutils-1.66.tgz
calpnalgo-2.36.tgz
calview-1.6.tgz
ccftools-1.26.1.tgz
cifbuild-4.1.tgz
colimchain-1.3.tgz
colimplot-3.3.1.tgz
colsmooth-1.0.1.tgz
dal-1.154.3.tgz
daltools-1.0.1.tgz
datautils-1.2.tgz
deceit-1.15.2.tgz
dscalc-2.2.1.tgz
dsplot-1.14.6.tgz
dsslib-3.16.6.tgz
eboxdetect-4.7.2.tgz
edetect_chain-2.4.tgz
eexpmap-3.23.3.tgz
efftplot-2.6.1.tgz
elcbuild-1.6.4.tgz
emask-2.7.tgz
embadpixfind-1.8.tgz
emchain-8.4.1.tgz
emdiag-3.9.tgz
emenergy-6.3.1.tgz
emevents-6.5.4.tgz
emeventsproj-1.2.tgz
emframes-4.11.3.tgz
emldetect-4.11.13.tgz
emosaic-1.3.tgz
emsaplib-2.9.tgz
epatplot-1.1.4.tgz
epauxcomb-1.1.tgz
epchain-8.30.tgz
epevents-6.32.tgz
epframes-8.46.6.tgz
epicproc-1.0.5.tgz
eposcorr-3.4.2.tgz
eptestdata-0.5.tgz
error-1.39.tgz
esensmap-3.5.tgz
esky2det-1.2.4.tgz
especplot-2.6.1.tgz
esplinemap-3.2.3.tgz
evarimgen-0.2.tgz
evigweight-1.1.6.tgz
evlistcomb-4.17.2.tgz
evselect-3.47.3.tgz
ewavelet-3.3.tgz
flspec-2.32.7.tgz
ftools-1.0.tgz
gtialign-2.5.tgz
gtibuild-1.1.tgz
gtimerge-1.3.tgz
gui-1.37.3.tgz
histolib-3.6.1.tgz
hkauxplot-4.4.2.tgz
hkgtigen-1.7.1.tgz
hkstrip-3.10.tgz
imagelib-3.2.tgz
imgdisplay-1.30.3.tgz
implot-1.7.tgz
interpr-1.15.2.tgz
inthist-2.13.1.tgz
layout-1.1.tgz
lcplot-1.15.tgz
merge-0.4.3.tgz
mssllib-2.18.2.tgz
oal-3.91.8.tgz
obssumm-4.4.5.tgz
odfbrowser-1.0.2.tgz
odffix-2.3.1.tgz
odfingest-3.9.tgz
omatt-2.27.1.tgz
omcomb-2.2.1.tgz
omcosflag-1.21.4.tgz
omdetect-3.5.6.tgz
omdrifthist-1.21.4.tgz
omfastflat-1.12.2.tgz
omfastshift-1.21.4.tgz
omfchain-1.22.9.tgz
omflatfield-2.2.3.tgz
omflatgen-1.8.1.tgz
omichain-1.30.4.tgz
omlcbuild-1.15.7.tgz
ommag-2.2.5.tgz
ommodmap-2.4.1.tgz
ommosaic-1.5.5.tgz
omprep-2.25.4.tgz
omregion-2.6.5.tgz
omsrclistcomb-1.21.9.tgz
omthconv-1.27.4.tgz
omthlcplot-1.0.4.tgz
orbit-2.8.tgz
param-1.68.tgz
pedal-1.30.1.tgz
playback-1.1.tgz
ppssumm-2.3.6.tgz
preferences-0.1.2.tgz
region-6.2.2.tgz
responselib-1.0.tgz
rgsangles-4.3.tgz
rgsbadpix-2.11.1.tgz
rgsenergy-1.4.2.tgz
rgsevconvert-1.1.tgz
rgsevents-3.5.2.tgz
rgsfilter-1.11.2.tgz
rgsfluxer-1.1.1.tgz
rgsframes-3.13.2.tgz
rgsimplot-1.11.7.tgz
rgslib-1.26.tgz
rgslinepos-1.2.tgz
rgsoffsetcalc-1.14.tgz
rgsproc-1.3.3.tgz
rgsprods-1.5.tgz
rgsregions-1.12.tgz
rgsrmfgen-0.50.2.tgz
rgssources-5.17.10.tgz
rgsspecplot-2.16.11.tgz
rgsspectrum-1.4.2.tgz
rmfgen-1.44.6.tgz
rmftools-0.14.1.tgz
rudi5-0.4.tgz
rudiframetime-1.2.tgz
sas-1.287.28.tgz
sashelp-1.0.1.tgz
saslib-1.68.tgz
sasperl-1.0.1.tgz
sasversion-1.0.1.tgz
selectlib-4.46.5.tgz
sla-1.7.1.tgz
slatec-1.36.tgz
specadd-1.11.1.tgz
srcdisplay-1.4.tgz
srcmatch-3.10.6.tgz
ssclib-2.4.1.tgz
statistics-1.0.1.tgz
tabgtigen-2.8.3.tgz
taskmain-1.67.2.tgz
testccf-1.96.4.tgz
testodf-0.42.tgz
timeappend-1.4.tgz
tools-1.45.2.tgz
utils-1.83.2.tgz
xcolorcod-1.8.tgz
xmmselect-2.43.3.tgz

* New and withdrawn packages

** New

Package odffix: version 2.3.1 [NEW]
Package omfchain: version 1.22.9 [NEW]
Package omlcbuild: version 1.15.7 [NEW]

** Withdrawn

None.


* Detailed list of changes between SAS 5.3.3 and SAS 5.3.0

Entries are formatted as follows:

Package : version  [was ]

New packages are labelled as such.

Software problem reports (SPR) can be viewed in two separate databases:

  SOC-SPR-nnnn: http://xmm.vilspa.esa.es/sas-cgi/db/spr?ViewRecord=1&Id=nnnn
  SSC-SPR-nnnn: http://xmmssc-www.star.le.ac.uk/sprpublic/db/SSC-SPR-nnnn.shtml


=========================================================================
Package arfgen: version 1.48.10 [was 1.48.8]

ChangeLog

Version 1.48.10 - 2002-05-28 (RDS)
------------------------------
+ (src/ConcreteArfDataServer.cc,
   src/AreaCalc.cc, CircularPsf.cc,
   src/PosWCS.cc)                     - Tidied up warnings

Version 1.48.9 - 2002-04-22 (RDS)
------------------------------
+ (src/CalCoreData.cc) - remove the error message in the destructor (SPR-2296)

Version 1.48.8 - 2002-04-11 (RDS)
------------------------------
More documentation.

=========================================================================
Package atthkgen: version 1.17.3 [was 1.17.2]

ChangeLog

Version 1.17.3 - 2002-05-24 (MJF)
---------------------------------
- (src/atthkgen_mod.f90): corrected median determination
closed SPR:
- SSC-SPR-2853: median values calculated incorrectly

Version 1.17.2 - 2002-03-10 (MJF)
---------------------------------
 + (odf*/0001_0000000000_SCX00000TCS.FIT): make columns OBTFINE proper "uint16"
   format via TZERO3=32768 and TSCAL3=1 FITS header keywords

=========================================================================
Package cal: version 3.138.4 [was 3.138]

ChangeLog

Version 3.138.4 - 2002-05-24 (GV)
---------------
	+ (Ccf.cc) remove some print statements that had been left in the
	constructor of CCfAccessLog. Modify operator<<() for CcfAccessLog,
	so that it also re-issues warnings about expired CCF
	constituents. This operator is used in taskmain before the task is
	exited, so these warnings are again prominently shown. Is this an
	example of a 'critical' warning? ;-)

Version 3.138.3 - 2002-05-23 (GV)
---------------
	+ (Ccf.{cc,h}) Change the class CcfAccessLog so that it knows
	about possible expired CCF constituents. In Ccf.cc rename the
	FileLocator fileLocator to myfileLocator to avoid a name clash
	with extern fileLocator (from SasFileLocator.h).
	+ Add the configuration file ccf.conf to the config subdirectory.
	+ Write test harness for the above: testccfconf
	
Version 3.138.2 - 2002-05-02 (UL)
---------------
        + fixed minor problem caused by not capturing invalid atan2() arguments
          in CAMCOORD2->TELCOORD conversion


Version 3.138.1 - 2002-04-24 (UL)
---------------
        + fixed bug in calculation of errors of converted OM count rates

Version 3.138 - 2002-03-14 (UL)
-------------
        + empirical correction to RGS effective area (driven by table
          RGS?_QUANTUMEF_????.CCF:RGA_EFFAREACORR) now done through interpolatio
n
          of correction data

=========================================================================
Package caloalutils: version 1.66 [was 1.65.1]

ChangeLog

Version 1.66 - 2002-04-16 (UL)
------------
	+ updated GS propagation delays with latest data from Ed Serpell (should
	  not have considerable impact on accuracy of time tags)
	+ added Plane class to Celestial.h

Version 1.65.1 - 2002-03-07 (UL)
--------------
	+ if needed EPNcam::toMode() now checks value of F1294 attribute (if
	  present - see ODF-ICD DCP-140) to distinguish between FF/eFF
	
=========================================================================
Package calpnalgo: version 2.36 [was 2.32.4]

ChangeLog

Version 2.36 - 2002-04-18 (MJF)
------------
        + (src/ctigain/sas_epn_gaincticorrect_mod.f90): adapted messages to
           new long-term CTI correction, cleared redundant variables

Version 2.35 - 2002-04-11 (MJF)
------------
        + (src/ctigain/sas_epn_gaincticorrect_mod.f90): omitted ADUREF, i.e.
           prepare for EPN_CTI_0009.CCF

Version 2.34 - 2002-04-09 (MJF)
------------
        + (src/ctigain/evcr03.f): editorial changes to prepare for CCF interface
        + (src/ctigain/sas_epn_gaincticorrect_mod.f90): as above

Version 2.33 - 2002-03-28 (MJF)
------------
        + (src/ctigain/evcr03.f): new low-energy SW/LW-CTI correction function
        + (src/ctigain/sas_epn_gaincticorrect_mod.f90): added comments to code

Version 2.32.4 - 2002-03-15 (MJF)
--------------
        + (DEPEND): added "param" as required by change of package "sas"

=========================================================================
Package daltools: version 1.0.1 [was 1.0]

ChangeLog

Version 1.0.1 - 2002-05-24 (GV)
-------------
	+ Make dsrm faster as per DAH's suggestion.
	
Version 1.0 - 2001-12-18 (GV)
-----------
	+ Re-uploaded as 1.0
	
=========================================================================
Package dsslib: version 3.16.6 [was 3.16.5]

ChangeLog

Version 3.16.6 - 2002-05-14 (DH)
--------------
	+ Fix bugs in combining of data subspace ranges.  Closes SPR 2865.

Version 3.16.5 - 2002-02-25 (DH)
--------------
	+ Remove debugging message that had inadvertenly been left in.

=========================================================================
Package eboxdetect: version 4.7.2 [was 4.7.1]

ChangeLog

Version 4.7.2 - 2002-05-16 HB
-----------------------------

Closed SPRs:
+SSC-SPR-2836 wrong source counts formula in documentation	
+SSC-SPR-2862 (on eposcorr) inconsistent lii/bii,lii_corr/bii_corr values:
	      constant 'pi' set to double precision (also fixed in
   	      emldetect)
	
Version 4.7.1 (2001-03-08) HB
-----------------------------

EXPIDSTR & ATT_SRC propagated from input

Closed SPR:
+SSC-SPR-2647  Can we have optical axis position please?
+SSC-SPR-2803 	NaNs in multi-camera source lists
	
=========================================================================
Package edetect_chain: version 2.4 [was 2.3.1]

ChangeLog

Version 2.4 - 2002-04-17 (GL)
------------

Added parameters for esplinemap: 
esp_withootset
esp_ooteventset
	

First submitted version.
=========================================================================
Package eexpmap: version 3.23.3 [was 3.23.2]

ChangeLog

Version 3.23.3 (2002-05-22) HB
------------------------------

To avoid excessive memory usage the task automatically switches 
from fast to slow pixelization mode in the rare cases where a large 
number of attitude historgram bins is required due to an unstable 
attitude. In task version 4.21 an error was introduced which resulted
in exposure maps offset by about 1.5 arcmin in these cases.
Corrected in version 3.23.3	

	
Version 3.23.2 (2002-03-05) HB
------------------------------	

Closed SPR:
+ SSC-SPR-2797 fails to compile on xmmos03
	
=========================================================================
Package elcbuild: version 1.6.4 [was 1.6.1]

ChangeLog

Version 1.6.4 - 2002-06-03 (NW)
----------------------
 
        Unmade the necessary updates for the new version of param!
                                                                               Version 1.6.3 - 2002-06-03 (NW)
----------------------
 
        Made the necessary updates for the new version of param.
                                                                                Version 1.6.2 - 2002-05-03 (NW)
----------------------  

        The documentation has been rewritten, as the usage of the task was
 	not clear.  This is in response to SPR 2847 - `elcbuild does not
 	recognize the format of xmmselect produced light curve'.

	

Version 1.6.1 - 22-05-01
----------------------  

        The documentation has been updated to include examples of how to
 	use elcbuild.  Also removed the necessity for the TIMEZERO
 	keyword, as it is not written out by lccorr, the preceding task
 	and is not a requirement within elcbuild or following tasks.
	

=========================================================================
Package embadpixfind: version 1.8 [was 1.6.1]

ChangeLog

Version 1.8 - 2002-04-17 (JB)
-----------
- Included possibility of diagonals in check for errors in CCF.
- Added security in quantile to avoid infinite loops as in SPR 2828.
- Add nval argument to medloc function to compensate packSpace argument
  introduced in 1.6.1 (it changed the result).
- Fixed SPR 2835: task crashes with no message (just prior warnings)
- Fixed SPR 2810: bright bad pix in test pipeline images

Version 1.7 - 2002-04-16 (JB)
-----------
- Fixed SPR 2828: task goes in indefinit loop

Version 1.6.1 - 2002-03-08 (JB)
-------------
- Add packSpace argument to all pack calls, to work around a problem
  with pack in the sas (src/embadpixfind_mod.f90).

=========================================================================
Package emevents: version 6.5.4 [was 6.5.3]

ChangeLog

Version 6.5.4 - 2002-05-14 (JB)
-------------
- Remove reference to lccorr in doc (emevents_description.tex).

Version 6.5.3 - 2002-04-02 (JB)
-------------
- Split the parameter dialog into two pages (config/emevents.lyt).

=========================================================================
Package emframes: version 4.11.3 [was 4.11.2]

ChangeLog

Version 4.11.3 - 2002-04-17 (UL)
--------------
- Stop sending the start time to OAL_obtToTimeTag to avoid negative OBTs.

Version 4.11.2 - 2002-03-27 (UL)
--------------
- Minor adjustment to test harness to allow presence of new keyword
  TFIT_IGH in primary header written by oal>=3.89.1 (modified test/primkey.ref)

=========================================================================
Package emldetect: version 4.11.13 [was 4.11.7]

ChangeLog

Version 4.11.13 - 2002-05-22 GL
-------------------------------

Removed test output
	
	
Version 4.11.12 - 2002-05-22 HB
-------------------------------

Closed SPR: 
SSC-SPR-2869 Several sources are not found at the right place
Error occured in versions from 4.11.8 
(Initialize XID band countrates to their proper values,
changed initialisation of unknown countrates to 100./exposure)
	
	
Version 4.11.11 - 2002-05-16 HB
-------------------------------

Closed SPR:
SSC-SPR-2862 (on eposcorr) inconsistent lii/bii, lii_corr/bii_corr	
             corrrected by changing constant 'pi' to double precision 
	
Version 4.11.10 - 2002-05-07 HB
-------------------------------

same as 4.11.9	
	
	
Version 4.11.9 (2002-05-07) HB
------------------------------

Closed SPR:
-SSC-SPR-2856 Incorrect summary band likelihood values if withxidband=yes
	
Version 4.11.8 (2002-04-22) HB
------------------------------

Closed SPRs:
-SSC-SPR-2833 No desciption of DIST_NN column 	
-SSC-SPR-2834 SUBMODE keyword wanted
-included changes made in 4.12.
	
Version 4.12 (2002-04-05) HB
----------------------------

- emldetect now accepts any eboxdetect, emldetect, or ewavelet
  source lists as input source lists. The number of energy
  bands and type and number of EPIC cameras do not need to
  be the same as in the current detection run.	

Version 4.11.8 (2002-04-22) HB
------------------------------

Closed SPRs:
-SSC-SPR-2833 No desciption of DIST_NN column 	
-SSC-SPR-2834 SUBMODE keyword wanted
	
Version 4.11.7 (2002-04-03) HB
------------------------------

.lyt file modified	
	
=========================================================================
Package epatplot: version 1.1.4 [was 1.1.3]

ChangeLog

Version 1.1.4 - 2002-05-15 (MJF)
--------------------------------
- (src/epatplot_mod.f90): updated LW and TI model for EPIC pn
- (src/epatplot_mod.f90): plot also singles+doubles for EPIC pn
- (src/epatplot_mod.f90): moved model and RAWY label
- (src/epatplot_mod.f90): use SRCPOS instead of average RAWY for EPIC pn TI+BU modes

Version 1.1.3 - 2002-03-28 (MJF)
--------------------------------
- (doc/eppatplot_description.tex): added an example output plot with pile-up

=========================================================================
Package epchain: version 8.30 [was 8.29.8]

ChangeLog

Version 8.30 - 2002-04-12 (MJF)
-------------------------------
- (src/epchain): updated `epevents' long-term CTI handling
- (DEPEND): needs `epevents-6.31'

Version 8.29.8 - 2002-03-25 (MJF)
---------------------------------
- (src/epchain): stop with error if non-existing exposure should be processed,
  the check for this was not active for setting "odfaccess=oal" [SSC-SPR-2818]
- (doc/epchain_description.tex): added three more examples
closed SPR:
- SSC-SPR-2818: Warning "Use of uninitialized value" should give error

=========================================================================
Package epevents: version 6.32 [was 6.30.6]

ChangeLog

Version 6.32  - 2002-04-18 (MJF)
--------------------------------
- (src/epevents_mod.f90): propagate SRCPOS for TI and BU modes to long-term
   CTI correction instead of the actual RAWY values (which refer to fine times)
- (DEPEND): needs `calpnalgo-2.36'

Version 6.31  - 2002-04-12 (MJF)
--------------------------------
- (src/epevents_mod.f90): removed warning about long-term CTI setting if the
   Y-dependence is activated
- (config/epevents.par): changed defaults of `ctilongtermy' (N -> Y) and of
   `ctilongtermpar' ("2.56 1.15 -0.26 0.10 120" -> "1.5e-5 1.15 -0.26 0.10 1")
- (DEPEND): needs `calpnalgo-2.35'

Version 6.30.6  - 2002-03-28 (MJF)
----------------------------------
- (doc/epevents_description.tex): some comments about long-term CTI effects

=========================================================================
Package epframes: version 8.46.6 [was 8.46.5]

ChangeLog

Version 8.46.6 - 2002-06-03 (MJF)
---------------------------------
- (src/epframes_mod.f90): adjusted the internal "late-time-reset" parameter
  from 1 to 2 for FF and eFF modes [SSC-SPR-2815], this fixes also problems
  that occured for 0032_0117500201_PNS011 (CCD 10) and 0042_0119100201_PNU003
  (CCDs 4-9), increased this parameter from 16 to 100 for TI and BU modes to
  solve a similar problem with 0411_0153750301_PNS001 (CCD 4). No changes
  for SW and LW modes (no problems known).
- SSC-SPR-2815: Event time computation fails for 2 ODFs [0193_9019300003_PNS003, 0224_0093620801_PNU003]

Version 8.46.5 - 2002-04-05 (MJF)
---------------------------------
- (doc/epframes_description.tex): minor reorganization, added another example

=========================================================================
Package epicproc: version 1.0.5 [was 1.0.4]

ChangeLog

Version 1.0.5 - 2002-05-24(GV)
-------------
	+ (EpicProc.cc) fix name of parameter "instrument" for hkgtigen
	(SOC-SPR-2306)
	+ all timing modes are processed by default.
	+ documentation updated.
	+ (EpicProc.cc) make sure external CCDs are always processed when
	MOS is in timing mode. 
	
Version 1.0.4 - 2002-04-02 (GV)
-------------
	+ More documentation  updates.
	+ Compact a little parameter dialog.
	
=========================================================================
Package eposcorr: version 3.4.2 [was 3.4]

ChangeLog

Version 3.4.2 (2002-05-15) HB
-----------------------------

New task parameters added:
rawxsyserr,r,h,1.5,,,"systematic error of input X-ray positions"
minxsyserr,r,h,0.2,,,"irreducible systematic error of X-ray positions"
maxsig,r,h,5.0,,,"sigma cutoff for X-ray/optical matches"
usemaxsig,b,h,yes,,,"use sigma cutoff limit"

maxposnerr internally multiplied by sqrt(0.5) to achieve consitency
  with RADEC_ERR values
	
Closed SPR:
+ SSC-SPR-2863 inproperly fixed SPR 2830 corrected
	
Version 3.6 (2002-04-20) HB
---------------------------	

Closed SPR:
+ SSC-SPR-2830 Number of matches does not account for multiple rows

Version 3.5 (2000-01-28) HB
---------------------------

-Error in parameter file corrected	
	
Version 3.4 (2001-10-17) HB
---------------------------

-error in the test harness corrected	
	
=========================================================================
Package error: version 1.39 [was 1.38]

ChangeLog

Version 1.39 - 2002-04-12
------------
	+ (src/ExceptionErrorHandler.cc)
	  Fixed bug in protected exceptions of non-C++ code.


Version 1.38 - 2002-01-14 (GV)
------------
	+ (SimpleHandler.h) if SAS_RAISE_SIGNAL is defined, then do not
	exit(1) but raise(SIGUSR1).

=========================================================================
Package esplinemap: version 3.2.3 [was 2.8.2]

ChangeLog

Version 3.2.3 (2002-05-24) GL
-----------------------------

Prevent crashes due to access of RAWCOLS with chipix=0


Close SPR:
SSC-SPR-2841: Problems with new oot features
	
Version 3.2.2 (2002-04-16) GL
-----------------------------

Close SPR:
SSC-SPR-2841: Problems with new oot features
	
	
Version 3.2.1 (2002-04-16) GL
-----------------------------

Close SPR:
SSC-SPR-2832: Does not build statically
	
Version 3.2 (2002-04-16) GL
-----------------------------

Fixed bug in CAL calls.

	
Version 3.1 (2002-04-16) GL
-----------------------------

Updated ChangeLog.

	
Version 3.0 (2002-04-15) GL
-----------------------------

Included treatment of OOT events.
New parameters "withootset" and "ooteventset".
	
	
Version 2.8.2 (2002-03-01) HB
-----------------------------
	
identical to 2.8.1 which for some reason was not 
ingested into the system properly	
	
=========================================================================
Package evigweight: version 1.1.6 [was 1.1.5]

ChangeLog

Version 1.1.6 - 2002-04-09 (JB)
-------------
- Put authors' Email on a new line and removed a parenthesis in Eq.(11).

Version 1.1.5 - 2002-04-09 (JB)
-------------
- Filled the doc's error section.

=========================================================================
Package evselect: version 3.47.3 [was 3.47.2]

ChangeLog

Version 3.47.3 - 2002-05-16 (DH)
--------------
	+ Documentation updates.  Closes SPR 2825.

Version 3.47.2 - 2002-02-27 (DH)
--------------
	+ Fix bug which caused an infinite exposure to be calculated for some
	  products if the input filtered event list was empty.

=========================================================================
Package lcplot: version 1.15 [was 1.14.1]

ChangeLog

Version 1.15 - 17-04-02
----------------------- 

	A loop included that removes bins with a low exposure and
	therefore large errors, from the plot as requested by JO.
	Documentation also updated.

Version 1.14.1 - 09-01-02
----------------------- 
	
        Data now referenced to TSTART and not to TIMEZERO, according to
	the OGIP recommendation.  Documentation also changed to
	incorporate this change.

	
=========================================================================
Package merge: version 0.4.3 [was 0.4.1]

ChangeLog

Version 0.4.3 - 2002-05-28 (MJF)
--------------------------------
 + (src/merge_mod.f90): clarified messages and warnings to avoid confusion
    in case of files with different or non-standard structure [SSC-SPR-2875]

Version 0.4.2 2002-05-27 (AMR)
-------------
 + (src/merge_mod.f90) Further start/stop time attributes and durations corrected
 + (doc/merge_description.tex) Updated

Version 0.4.1 2001-11-08 (AMR)
-------------
 + (src/merge_mod.f90) STDGTI files now merged (SSC-SPR-2617). 
   Various start & stop time attributes corrected
 + (doc/merge_description.tex) Updated

=========================================================================
Package mssllib: version 2.18.2 [was 2.18.1]

ChangeLog

Version 2.18.2 2002-05-23 (CB)
	(+src/frametime_mod.f90) - Checks added to stop program crashing
	if an index of the array windowframetime is out of bounds (fixes
	SPR 2845).
	
Version 2.18.1 2002-01-25 (VNY)
	(+src/numerical_mod.f90) - The subroutine DLOCATE in the 
	module numerical_mod.f90 can crash if the input xx-array
	consists of only one element. Protection against this 
	potential crash (subscription message) has been added (SPR 2702).

=========================================================================
Package oal: version 3.91.8 [was 3.90.2]

ChangeLog

Version 3.91.8 - 2002-05-28 (UL)
--------------
	+ changed text of new error message introduced with 3.91.7

Version 3.91.7 - 2002-05-24 (UL)
--------------
	+ issue error message if used with skeleton summary file (odfingest
	  has not been run)

Version 3.91.6 - 2002-05-03 (UL)
--------------
	+ fixed rare problem with highly anomalous pn aux data (extremely
	  frequent occurence of FTCOARSE=32767 frames, seen in e.g.
	  odffix'ed 0053_0121500601)

Version 3.91.5 - 2002-04-26 (UL)
--------------
	+ fixed minor problem with pathological exposures shorter than 90s
	+ fixed minor problem with rare anomaly in pn PMH data (seen e.g.
	  in 0175_0132520301_PNX00000PMH.FIT)

Version 3.91.4 - 2002-04-23 (UL)
--------------
	+ fixed new problem seen with ODF 0120_0102640201 (this is related
	  to a 3.91-change to correct for TM anomaly in Crab ODF 0411_0153750301)

Version 3.91.3 - 2002-04-19 (UL)
--------------
	+ end with error if orbit file is empty

Version 3.91.2 - 2002-04-18 (UL)
--------------
	+ another improvement in enhancing robustness against EPIC clock
	  late-reset anomalies

Version 3.91.1 - 2002-04-18 (UL)
--------------
	+ small fix in orbit file reading: better robustness againt pathological
	  empty orbit files (e.g. odffixed data)

Version 3.91 - 2002-04-17 (UL)
------------
	+ meliorated robustness against EPIC clock late-reset anomaly
	  (this fixes problem seen in Crab obs 0411_0153750301)
	+ fixed another problem with S/U exposure confusion (e.g. in ODF
	  0418_0110980301)
	+ fixed minor problem with re-calculation of signal propagation delays
	+ read entire orbit file instead of just data covering obs window; needed
	  for recalculation of signal propagation delays in TimeCorrelator

Version 3.90.2 - 2002-04-11 (UL)
--------------
	+ fixed minor problem with determination of ODF location when SAS_ODF is
	  given just name of summary file

=========================================================================
Package odfingest: version 3.9 [was 3.7.5]

ChangeLog

Version 3.9 - 2002-05-17 (GV)
-----------
	+ (OdfObject.cc) make the messages about missing CONFIGURATIOn or
	PROPOSAL record more explicit.
	
Version 3.8 - 2002-04-10 (GV)
-----------
	+ (OdfObject.cc::proposal_summary_rec) Change how the PROPOSAL
	record is read from the original SUM.ASC file. This should make it
	more robust against those cases when the line of text containing
	the word PROPOSAL contains characters other than blank. SOC-SPR-2286.
	+ A missing CONFIGURATION record in the SUM.ASC is no longer a
	warning, only a message.

Version 3.7.5 - 2002-03-18 (GV)
-------------
	+ Test harness against DCP 141 updated (odfconf). Relevant section
	  was actually commented out.

=========================================================================
Package omatt: version 2.27.1 [was 2.27]

ChangeLog

Version 2.27.1  - 2002-05-29 (CB) 
-----------------
	Documentation updated and minor improvement to astrometry
	correction made. 


Version 2.27  - 2002-01-08 (CB) Modified DEPEND file for ssclib
--------------

=========================================================================
Package omcomb: version 2.2.1 [was 2.2]

ChangeLog

Version 2.2.1  - 29/05/2002 (CB)
___________
	Documentation updated

Version 2.2  - 08/01/2002 (CB)
___________
	DEPEND file ammended. Fatal error message ammended.

=========================================================================
Package omcosflag: version 1.21.4 [was 1.21.3]

ChangeLog

Version 1.21.4 2002-05-28  (CB/SRR) updated documentation
_________________________	
	
Version 1.21.3 2002-02-18  (CB) DEPEND file ammended to fix SPR 2755. 
_____________________________	

=========================================================================
Package omdetect: version 3.5.6 [was 3.5.5]

ChangeLog

Version 3.5.6   2002-05-30 (CB)
--------------------------------
	Documentation updated.

Version 3.5.5   2002-03-26 (CB)
--------------------------------
	Some write statements removed.

=========================================================================
Package omdrifthist: version 1.21.4 [was 1.21.3]

ChangeLog

Version 1.21.4 2002-05-28 (CB/SRR) 
------------------------------
	 Documentation updated.
	
Version 1.21.3 2002-03-14 (CB) 
------------------------------
	 Documentation corrected.


=========================================================================
Package omfastflat: version 1.12.2 [was 1.12.1]
omfastflat has no ChangeLog information
=========================================================================
Package omfastshift: version 1.21.4 [was 1.21.3]

ChangeLog

Version 1.21.4: 30th of May, 2002 (VNY)
	(+src/omfastshift_mod.f90, +doc/omfastshift_description.tex)
	documentation updated.
Version 1.21.3: 26th of March, 2002 (CB)
        DISTRIBUTION changed to world.
=========================================================================
=========================================================================
Package omflatfield: version 2.2.3 [was 2.2.2]

ChangeLog

Version 2.2.3 - 2002-05-29 (CB/SRR)
	+ Documentation updated.
	
Version 2.2.2 - 2002-01-28 (CB)
	+ (config/omflatfield.par) Ammended to rectify build problem
	(fixes SPR 2768).
	
=========================================================================
Package omflatgen: version 1.8.1 [was 1.8]

ChangeLog

Version 1.8.1 - 2002-05-29 (CB/SRR)
___________
	Documentation updated
	
Version 1.8 - 2001-01-08 (CB)
___________
	DEPEND file ammended.
	
=========================================================================
Package omichain: version 1.30.4 [was 1.30.2]

ChangeLog

Version 1.30.4 - 2002-05-30 (CB) 
_____________
	Documentation updated.

Version 1.30.3 - 2002-05-27 (CB) 
_____________
	+ (src/omich.pl) Fix for Jupiter problem. Documentation updated.

Version 1.30.2 - 2002-03-06 (CB) 
_____________
	+ (src/omich.pl) Added check for the existence of the file that
	  ps2pdf converts(SPR 2801).


=========================================================================
Package ommag: version 2.2.5 [was 2.2.4]

ChangeLog

Version 2.2.5 2002-04-29  (CB)
------------------------
            +(src/ommag_mod.f90) Ammended program to apply the correct UV
	    photometry correction from 12 to 35 pixels (fixes SPR 2846)
	 
	
Version 2.2.4 2002-03-14  (CB)
------------------------
	Documentation corrected
	
=========================================================================
Package ommodmap: version 2.4.1 [was 2.4]

ChangeLog

Version 2.4.1 - 2002-05-29 (CB/SRR)
------------
        +(doc/ommodmap_description.tex) minor correction and improvement
	(SPR 2697).
	
Version 2.4 - 2002-01-08 (CB)
------------
	DEPEND file modified for ssclib.

=========================================================================
Package ommosaic: version 1.5.5 [was 1.5.3]

ChangeLog

Version 1.5.5 - 2002-05-30 - (CB)
-------------------------
      +(src/ommosaic_mod.f90) Modified to add ATT_SRC keyword  (fixes SPR 2885).
        
	
Version 1.5.4 - 2002-05-29 - (CB)
-------------------------
        Documentation corrected
	
Version 1.5.3 - 2002-03-14 - (CB)
-------------------------
        Documentation corrected
	
=========================================================================
Package omprep: version 2.25.4 [was 2.25.3]

ChangeLog

Version 2.25.4 - 2002-05-28 (CB/SRR) 
------------------------------------
	Documentation updated.

Version 2.25.3 - 2002-03-14 (CB) 
--------------------------------
	Documentation corrected.

=========================================================================
Package omregion: version 2.6.5 [was 2.6.3]

ChangeLog

Version 2.6.5 - 30/05/2002 (VNY) - documentation updated
Version 2.6.4 - 09/05/2002 (VNY) - ChangeLog-file corrected	
Version 2.6.3 - 14/03/2002 (CB) (+/doc/omregion_description.tex) 
	Documentation corrected.
=========================================================================
Package omsrclistcomb: version 1.21.9 [was 1.21.8]

ChangeLog

Version 1.21.9 : - 2002-05-30 (CB)
-----------------------------	
	Documentation updated.

Version 1.21.8 : - 2002-03-14 (CB)
-----------------------------	
	Uploaded because I previously accidentally uploaded a test
	version of the program.

=========================================================================
Package omthconv: version 1.27.4 [was 1.27.2]

ChangeLog

Version 1.27.4 - 2002-05-28 (CB)  
--------------------------------
  +(src/omthconv_mod.f90) Added attributes EXPIDTR and ATT_SRC
	   (SPRS 2879 & 2880)
       
	
Version 1.27.3 - 2002-05-28 (CB/SRR)  
--------------------------------
        Documentation updated.
	
Version 1.27.2 - 2002-03-14 (CB)  
--------------------------------
        Documentation corrected.
	
=========================================================================
Package rgssources: version 5.17.10 [was 5.17.9]

ChangeLog

Version 5.17.10 - 07 May 2002 (IMS SSC/LUX)
--------------------------
- Fixed SPR 2760.
- Fixed SPR 2827.
- Fixed SPR 2843.
- Fixed SPR 2844.

Version 5.17.9 - 19 Mar 2002 (IMS SSC/LUX)
--------------------------
- Partial documentation upgrade.

=========================================================================
Package rgsspecplot: version 2.16.11 [was 2.16.6]

ChangeLog

Version 2.16.11 - 2002-06-03 (NW)
        -------------------------------
 
        This version does not contain the changes for the new version of
        param, only the new documentation.
 
Version 2.16.10 - 2002-06-03 (NW)
        -------------------------------
 
        Made the necessary changes for the new version of param and
        updated the documentation to explain the method used for the
        rebinning.
                                                                                Version 2.16.9 - 2002-05-16 (NW)
        ------------------------------- 

        Extended the y-scale for the case of a spectral plot which has
 	maximum counts less than the maximum error, so that the error
 	values (which are always positive) can be viewed.  
	
Version 2.16.8 - 2002-05-09 (NW)
        ------------------------------- 

        The data is now plotted as a histogram, as requested in SPR 2860
 	(histogram-style please).  Documentation has been updated.

	
Version 2.16.7 - 2002-04-25 (NW)
        ------------------------------- 

        Extended the y-scale for the case of a spectral plot which has
 	only negative values, so that the error values (which are always
 	positive) can be viewed.

	
	
Version 2.16.6 - 2002-03-15 (NW)
        ------------------------------- 

	 Added the missing error label names as requested for Version 5.3
	 in the documentation.

	
=========================================================================
Package rgsspectrum: version 1.4.2 [was 1.4.1]

ChangeLog

Version 1.4.2 - 2002-05-17 (JDR)
-------------
- replaced output NULL values with zero (XSPEC on DEC Alpha chokes on NULL)

Version 1.4.1 - 2002-03-08 (JDR)
-------------
- modified AREASCAL calculation, pending further refinement

=========================================================================
Package rmfgen: version 1.44.6 [was 1.44.5]

ChangeLog

Version 1.44.6 2002-05-15 (RDS)
------------
+ (src/CorePosData.cc)    Fixed problem with source centre falling in a
                          chip gap (SPR-2298)

Version 1.44.5 2002-04-11 (RDS)
------------
Documentation update to explain which modes are supported in this
release.

=========================================================================
Package sas: version 1.287.28 [was 1.287.22]

ChangeLog

Version 1.287.28 - 2002-06-01 (GV)
----------------
	+ Re-generate configure with an old version of autoconf, because
	recent versions seem not to work (Must be looked into).

Version 1.287.27 - 2002-05-31 (GV)
----------------
	+ Set AKA=5.3.3 and switch on the creation of libraries with a
	  version number for the release.
	
Version 1.287.26 - 2002-04-26 (GV)
----------------
	+ (configure.in) adjust an already existing test that about the
	need to add the option -E to the GNU linker. The test used to be
	triggered only when the existing perl had been compiled with gcc
	2.8.1, but the solution is applicable to a more general
	case. SOC-SPR-2299. 
	
Version 1.287.25 - 2002-04-13 (GV)
----------------
	+ Re-upload.

Version 1.287.24 - 2002-04-13 (GV)
----------------
	+ Re-generate configure on a machine other than xmmws0, as what is
	created there does not run anywhere else (?)
	
Version 1.287.23 - 2002-04-13 (GV)
----------------
	+ (Makefile.top) change == to = in one of the test conditions.
	+ (configure.in) detect GNU find (needed to make binaries).
	+ (configure.in) by default version numbers in shared libraries is off again.
	+ (Makefile.top) do not do a clean_binary when the binary
	distribution is made, so that the SAS tree can be used to compile
	against after a binary is made.
	
Version 1.287.22 - 2002-04-13 (GV)
----------------
	+ (Makefile.top) make clean_binary before creating the binary
	distributions.

=========================================================================
Package sashelp: version 1.0.1 [was 1.0]

ChangeLog

Version 1.0.1 - 2002-05-13 (GV)
-------------
	+ Support mozilla as well as netscape.
	
Version 1.0 - 2001-09-24 (GV)
-----------
	+ Add two new parameters: remote, newwindow.
	+ Upload the documentation as well.
	
=========================================================================
Package sasversion: version 1.0.1 [was 1.0]

ChangeLog

Version 1.0.1 - 2002-05-27 (GV)
-------------
	+ Also show the values of a few important SAS environment variables.
	
Version 1.0 - 2001-03-22 (GV)
-----------
	+ make use of sasversion.h.
	
=========================================================================
Package specadd: version 1.11.1 [was 1.11]

ChangeLog

Version 1.11.1 - 2002-05-29 (MC)
-------------
        + (src/specadd_mod.f90): fixed SSC-SPR-2887: reference to 
	                         uninitialised pointer

Version 1.11 - 2002-01-15 (MC)
-------------
        + (DEPEND) removed flspec reference that was producing a
	           cyclic dependency

=========================================================================
Package srcmatch: version 3.10.6 [was 3.10.4]

ChangeLog

Version 3.10.6 - 2002-05-17 (GL)

Fixed bug in writing flag columns
Fixed test harness

	
Version 3.10.5 - 2002-05-15 (GL)
--------------------------------- 
New columns:
     pn_val_flag
     pn_ver_flag
     pn_ver_comm
     m1_val_flag
     m1_ver_flag
     m1_ver_comm
     m2_val_flag
     m2_ver_flag
     m2_ver_comm
	
Closed SPR:
+ SSC-SPR-2823: Misleading instrument specific keywords
  ( set INSTRUME = EPIC, removed DATAMODE, FILTER, and EXPOSURE )
	
	
Version 3.10.4 - 2002-03-13 (GL)
--------------------------------- 

Closed SPR:
+ SSC-SPR-2812: Band 5 exposure column name typo

Removed columns for energy band 6 from output table.

	
=========================================================================
Package ssclib: version 2.4.1 [was 2.4]

ChangeLog

Version 2.4.1 - 05 Jun 2002 (IMS/LUX)
-------------
- Fixed SPR 2868 (on rgssources). It was a 'status' in coordinate_mod that was not initialised.

Version 2.4 - 08 Mar 2002 (IMS/LUX)
-------------
- Functionally this is exactly the same as 2.3.9, it is just uploaded as 2.4 so that dependencies of other tasks can be updated.

=========================================================================
Package tools: version 1.45.2 [was 1.42.3]

ChangeLog

Version 1.45.2 - 2002-04-25 (UL)
--------------
	+ made tcsfix more verbose

Version 1.45.1 - 2002-04-23 (UL)
--------------
	+ extended tcsfix to also handle Santiago-clock 1s problem

Version 1.45 - 2002-04-19 (UL)
------------
	+ fixed another problem with regionsmaks's layout file

Version 1.44.2 - 2002-04-19 (UL)
--------------
	+ fixed problem with invalid regionmask parameter file

Version 1.44.1 - 2002-04-19 (UL)
--------------
	+ brought in line with oal-3.91

Version 1.44 - 2002-03-25 (UL)
------------
	+ fixed minor problem in regionmask's layout file

Version 1.43 - 2002-03-25 (UL)
------------
	+ added tool 'satvelsrc'

Version 1.42.3 - 2002-02-12 (GV)
--------------
	+ Config files for regionmask moved to subdirectory config.

=========================================================================
Package xmmselect: version 2.43.3 [was 2.43.2]

ChangeLog

Version 2.43.3 - 2002-05-17 (UL)
--------------
	+ closed SPR 2307: does not close previously launched ds9 session upon exit

Version 2.43.2 - 2002-04-11 (UL)
--------------
	+ create "CHANNEL"-vs.-"RATE.STAT_ERR" plot when spectrum of rates was
	  generated by evselect ("withzcolumn=true")

=========================================================================


[an error occurred while processing this directive] Updated on: [an error occurred while processing this directive]